Conference Publications/Presentations

1. M.M. Rashid, M.H. Kabir and M. N. Islam.(2000). A Study on the Use of Rice Bran Oil and Vegetable Oils as Renewable Sources of Energy and Alternative Fuel for Lighting Purposes. Proceedings of the Sixth Annual Paper Meeting and the First International Conference on Mechanical Engineering, February 18-20, 2000, Institute of Engineers Bangladesh (IEB), Dhaka-1000, Bangladesh; Paper No-4, pp. 22-29. (full-length paper)
2. M.M. Rashid and J.A. Naser. (2001). Computational Fluid Dynamics For Newtonian Fluid Flow Through Concentric Annuli With Center Body Rotation, Proceedings of the Fourth International Conference on Mechanical Engineering, December, 26-28, 2001, Dhaka, Volume-II, Section –IV (Fluid Mechanics), pp. 119-123. (full-length paper)
3. M.M. Rashid and J.A. Naser. (2002). Non-Newtonian Fluid Flow Through Concentric Annuli, Proceedings of the First BSME-ASME International Conference on Thermal Engineering, 31 December, 2001-2 January 2002, Dhaka, Bangladesh; pp. S46-S51. (full-length paper).
4. M.M. Rashid. (2002). Numerical Simulation – A Modern Concept of Chemical Industries, In the Proceedings of the 1st Annual Paper Meet and International Conference on Chemical Engineering, February 12, 2002, IEB Chandpur, Bangladesh , Paper No-7, pp.72-77. (full-length paper)
5. M.M. Rashid. (2002). Engineering Functions in the 21st Century. Proceedings of the First Annual Paper Meeting and the First International Conference on Electrical Engineering, February 9, 2002, IEB, Rajshahi, Bangladesh, pp. 171-175. (full-length paper)
6. M.M. Rashid and M . Manaf. (2002). Technical Challenge about Woodward Governor’s Trouble Shooting and Rectification in Jamuna Fertilizer Company Limited. Proceedings of the Seventh Annual Paper Meeting and the Second International Conference on Mechanical Engineering, February15, 2002, IEB, Chittagong, Bangladesh, Paper No.26, pp. 206-211. (full-length paper).
7. M.M. Rashid. (2003). Innovation of Programming Keyboard in Jamuna Fertilizer Company Limited, Proceedings of the Eighth Annual Paper Meeting and the Third International Conference on Mechanical Engineering, March 20-22, 2003, IEB, Ramna, Dhaka-1000, Bangladesh; Paper No.60. (abstract)
8. M.M. Rashid and M. Manaf. (2004). A process upgrading of urea synthesis and high pressure recovery section by reducing pressure from high pressure loop, Proceedings of the national paper meeting on fertilizer sector, IEB, Rangadia, Chittagong, Bangladesh, July 09, 2004, Paper No 1B, pp. 68-72. (full-length paper)
9. M.M. Rashid. (2004). Analyzing Management Information Systems of the Jamuna Fertilizer Company Limited: A case Study, Proceedings of the national paper meet on fertilizer sector at IEB Rangadia, Chittagong, Bangladesh, July 09,2004, Paper No 1A, pp. 73-79. (full-length paper)
10. M.M. Rashid. (2006). Technology for disable people achieves Millennium Development Goals: Bangladesh Perspectives, Proceedings of the Twenty-first Indian Engineering Congress, December 22-24, 2006, Guwahati, Assam, India, pp. 315-318.
11. M.M Rashid, Junichi Tamaki, A. M.M Sharif Ullah and Akihiko Kubo. (2010). A Numerical Simulation Model for Customer Needs Analysis of Product Development, International Conference on Mechanical, Industrial and Energy Engineering 2010, 23-24, December, 2010, Khulna, Bangladesh, MIE10-040 dated, July 13, 2010.
12. M.M Rashid, Junichi Tamaki, A. M.M Sharif Ullah and Akihiko Kubo. (2010). A Numerical Method for Customer Need Analysis, Proceedings of the 13 Annual Paper Meeting Conference on Mechanical Engineering APM 2010, MED, IEB, Bangladesh, paper No.MED-12 .
13. M.M Rashid, Junichi Tamaki, A.M.M Sharif Ullah and Akihiko Kubo. (2010), A Virtual Customer Needs System for Product Development, Annual Proceedings of Japan Society of Precision Engineering, Paper No.307 September 04, 2010.

14. M.M Rashid, MA Rashid Sarker, Junichi Tamaki, A.M.M Sharif Ullah and Akihiko Kubo. (2012), Logical Aggregation of Customer Needs Assessment, Fifth International Symposium on Computational Intelligence and Industrial Applications, Sapporo, Japan, August 20-26, 2012.
15. M.M. Rashid (2011). Application of Fuzzy Logic for Customer Needs Analysis: A Case Study on One Dimensional Attribute of Kano Model, Proceedings of the Ninth International Conference on Mechanical Engineering, December, 18-20, 2011, Dhaka, Paper ID-ICME-11-RT-006. (full-length paper).
16. M.M. Rashid (2011). Virtual Study for the Indifferent Attribute of Kano Model, Proceedings of the 1st International Conference on Mechanical Engineering & Renewable Energy, ICMERE-2011, CUET, Chittagong-4349, Bangladesh, Paper ID-ICMERE2011-PI-109. (full-length paper).
17. M.M. Rashid (2011). A Kano model based Customer needs simulation System for Investing Must-be Attribute, Proceedings of the 1st International Conference on Mechanical Engineering & Renewable Energy, ICMERE-2011, CUET, Chittagong-4349, Bangladesh, Paper ID-ICMERE2011-PI-190. (full-length paper).
18. M.M. Rashid (2012). Comparative Study of Different Types of Decision Models: A Case is considered for Evaluation of hard materials using Eco-attributes. Proceedings of the 14th Annual Paper Meeting and the 6th International Conference on Mechanical Engineering, MED, IEB, Dhaka, Bangladesh, Paper No.MS-14, (Abstract).
19. M.M Rashid, A.M.M Sharif Ullah, Junichi Tamaki, and MA Rashid Sarker (2013), Epistemic Uncertainty Study of the Conceptual Phase of Product Development by Multi-valued Logic and Information Content, Proceedings of the 1st International Conference on Mechanical, Industrial and Material Engineering ICMIME-2013, RUET, Rajshahi, Bangladesh, Paper ID-Abs_20_IPE. (Full-length paper).
20. M.M Rashid, (2013), Productivity Improvement through Job Satisfaction: A Study of Golden Son Limited , Proceedings of the 2nd International Conference on Mechanical Engineering & Renewable Energy, ICMERE-2013, dated May 1-3,2014, CUET, Chittagong-4349, Bangladesh, Paper ID-ICMERE2011-PI-017(Full-length paper).
21. M.M Rashid, (2013), Compliance of safety, health and welfare in RMG: Proceedings of the 10 th International Conference on Mechanical, Engineering ICME-2013, BUET, Dh aka, Bangladesh, Paper ID-15. June 20-21,2014.
22. Azim Mohammad, Shibbir Ahmad and Dr. Md. Mamunur Rashid (2015); Identification of retention time & information delays applying value stream mapping technique in apparel manufacturing organization , Proceedings of the 16th Annual Paper Meeting and the 7th International Conference on Mechanical Engineering, January 02, 2015, Institute of Engineers Bangladesh (IEB), Dhaka-1000, Bangladesh; Paper No-IE-1. (full-length paper).
23. Md. Mahadi Hasan, Dr. Engr. Md Mamunur Rashid (2015);Fire Safety in Labor Intensive Sector in Bangladesh; Proceedings of the 16th Annual Paper Meeting and the 7th International Conference on Mechanical Engineering, January 02, 2015, Institute of Engineers Bangladesh (IEB), Dhaka-1000, Bangladesh; Paper No-IE-21. (full-length paper).
24. Mohammed Shaukat Ali, Dr. Engr. Md Mamunur Rashid(2015); Quality Function Deployment In Banking; Proceedings of the 16th APM and the 7th International Conference on Mechanical Engineering, January 02, 2015, Institute of Engineers Bangladesh (IEB), Dhaka-1000, Bangladesh; Paper No-IE-23 (full-length paper).
25. Md. Tabiur Rahman, Dr. Engr. Md Mamunur Rashid(2015); Occupational Health And Safety Of Wood Based Industry in Bangladesh; Proceedings of the 16th Annual Paper Meeting and the 7th International Conference on Mechanical Engineering, January 02, 2015, Institute of Engineers Bangladesh (IEB), Dhaka-1000, Bangladesh; Paper No-IE-24. (Full-length paper).
26. Md Mamunur Rashid, M. Iqbal, Md. Mossarrof Hossain, Mokbul Hossain and Md Mostafizur Rahman; Safety Audit in a Milk Industry of Bangladesh; Proceedings of the International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME2015) 11-13 December, 2015, RUET, Rajshahi, Bangladesh. Paper ID-IE-53. (Full-length paper).